Innokin Endura T22 Starter Kit – 2000mAh
Innokin Endura T22 Vape mod is a 1 button, easy to fill & easy to use compact device. Optimized at 14W with specially designed 1.5ohm coils, Endura T22 brings the best flavor and clouds ever.
Endura T22Size: 22mm x 85mm x 32 mm
Battery: 2000mAh, 7C continually
Standby current: 10 uA max
Maximum output Wattage: 14W
Maximum output Current: 3.5A
Maximum output Voltage: 5.5V
Clearomizer Resistance: 1.2 – 2.5ohm
Charging: Micro USB DC5V/1A
Prism T22 Tank
Size: 22 (D) x 64 (H)
It comes with
- 1 x Endura 2000mAh battery
- 1 x 4ml Prism Tank (with coil)
- 1 x Extra coil
- 1 x USB cable
- 4 x O-rings
- 2 x Mouthpiece
Real 2000 mAh Capacity
Optimized output of 14W at 1.5ohm
Charging short circuit protection
Over discharge protection
Atomizer short circuit protection
Short circuit protection
Over charge protection
Integrated PCB safety and charging protections
100% Japanese Organic Cotton
4ml Stainless Steel & Pyrex Glass Tank
Replacing coils with No-Spill Coil Swap System
How to refill the Tank
1. Carefully unscrew the top cap from the Tank.
2. Add e-Liquid against the inside wall of the Tank.
Important: After refilling, please wait 5 minutes before vaping.
Replace a coil
1. Hold the Tank with the threading up.
2. Unscrew the bottom Metal cap of the Tank
3. Hold the coil and gently pull to remove.
4. Carefully and safely dispose of the used coil. Keep away from children and pets.
5. Properly align the flat sides of the new coil.
6. Push to fully insert the new coil firmly into Tank.
7. Ensure that the coil is completely inserted.
8. Carefully and firmly tighten the metal cap.
Caution: Make sure there is no e-liquid in the Tank before you pull out the coil
- It doesn’t come with liquids, you shall buy separately.
- You can buy 5pcs Innokin Prism Relacement Coil for T18/T22.